Citronic 170.180, Owner'S Manual

Page: 5 / 10

™
9. SIGNAL LIMIT LED
When this LED is on, it shows the intervention of the limiting device as the level of the
signal is over the safety limit.
10. ON LED
Indicates that the speaker is receiving power.
11. AC INPUT
Connect to power using the cable supplied from the factory with the loudspeaker.
Internally this input is fitted with a fuse (T2AL for the 250VAC
version
---T4AL for the
120 VAC version) that can be taken out with a screwdriver opening the wicket.
WARNING:
Remove power cable before replacing the fuse.
12. POWER SWITCH
Switches power to the speaker ON/OFF
Satellite Technical Specification
Max output power (1KHz, THD 1%):
(90 + 30) W
Distortion:
< 0.1 % @ 20 Hz -20KHz
Input impedance Line:
30 K Ω (Balanced) 15 K Ω (Unbalanced)
Input impedance Mic:
2 K Ω (Balanced) 1 K Ω (Unbalanced)
Input sensitivity Line:
0 dB (0.775 V)
Input sensitivity Mic:
-30 dB
Power supply:
check the label on the rear panel
Sensitivity (SPL 1W/1M):
91 dB
Max SPL:
112 dB
Frequency response:
70 Hz – 20 KHz
Components:
2 x 102mm (4”) Custom Woofer
1 x 25mm (1”) Compression Tweeter
Construction and finish:
Composite moulded, high impact enclosure
Controls:
High Definition, Line Level, Mic Level, GND
Lift
Connections:
Mic Input: 1 x XLR – F
Line Input: 1 x XLR – F
Mix Output: 1 x 6.3mm Jack
Link Output: 1 x 6.3mm Jack
Dimensions (WxHxD):
182 x 330 x 226 mm
Weight:
4.5 Kg