C
D
E
A
116
III
Each seat can be folded onto the
fl oor to form a fl at surface, thus
enabling you to modify your vehi-
cle’s interior space.
TO FOLD THE SEATS
From the exterior
- Pull fi rmly upwards on strap
C
,
as indicated by the red arrow,
to unlock the seat ; maintain the
pressure until the seat is fully
folded.
- Push the backrest slightly for-
wards, so that the backrest piv-
ots, folding onto the seat base.
The assembly will then lower
onto the fl oor.
From the boot (in the loading
situation, for example)
You can fold the second-row
seat(s) from the boot, having fi rst
folded the third-row seats.
- Pull on the control
D
to unlock
the chosen seat, push the back-
rest gently forwards.
TO RETURN THE SEATS TO
THE UPRIGHT POSITION
1.
Return the second-row seat
bases to their initial position
and lock them in that position.
2.
Raise the backrests and push
them rearwards so that they
lock in position.
To unlock / lock the rigid plate :
- Slide the latch
A
on the plate
downwards, to unlock.
- Return the plate to the upright
position, then slide the latch
A
upwards, to lock.
Note :
Before deploying the rigid
plates, check that the second-row
seats are slid as far as possible
rearwards. 5-seater confi gurations
do not have these rigid plates.
RIGID PLATE
Each second-row seat backrest
has a rigid plate attached.
This plate enables you :
- to have a continuous load surface
in the boot, whatever the positions
of the seats,
- to avoid having objects sliding un-
der the second-row seats.
Before moving the third-row
seats, return the second-row
rigid plates to their initial posi-
tion and lock them.
Emergency exit : Should the
fi rst system fail (control
C
), the
control
D
is available for use by
third-row passengers to accel-
erate their exit.
IMPORTANT : Always super-
vise any movements of seats
by children.
S E C O N D R O W S E A T S
G R A N D C 4 P I C A S S O
Summary of Contents for c4 picasso 2006
Page 25: ...28 II D A S H B O A R D ...
