CITROËN BERLINGO Owner'S Handbook Manual Download Page 94

Page: 94 / 238

Practical information

Modutop roof BARS

These two longitudinal Modutop roof

bars can be removed.

The maximum authorised weight on

each bar is 35 kg.

In all cases, the load must rest on

the non-slip bands provided for this

purpose and must not touch the roof or

the glazing of the roof.

Recommendations for loading on

the roof:

Open the protective covers.

Use the screwdriver (stored in the

tool kit under the right-hand seat) to

remove the 4 bolts.

Turn the bars 90° placing the

hollow parts towards the front.

Tighten the 4 bolts.

Close the protective covers.

Use the strap passages

only to

secure the load

rmly.

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for BERLINGO















































































































































































































































Search results

Summary of Contents for BERLINGO

Reviews:

Related manuals for BERLINGO

Brands by name

Popular brands

CITROËN BERLINGO, Owner'S Handbook Manual

Search results

Summary of Contents for BERLINGO

Reviews:

Related manuals for BERLINGO

Brands by name

Popular brands