CITROËN 2014 C4 Picasso, Handbook, Page: 269 / 428

267
7
Practical information
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2014
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not
block traffic: the ground must be level,
stable and not slippery.
Apply the parking brake unless it has
been programmed to automatic mode,
switch off the ignition and engage first
gear* to block the wheels.
Check that the braking warning lamp
and the
P
warning lamp in the parking
brake control lever come on.
For greater safety, place a chock
2
against the wheel opposite to the one
being changed.
The occupants must get out of the
vehicle and wait where they are safe.
Never go underneath a vehicle raised
using a jack; use an axle stand.
List of operations
F
Remove the finisher from from each
of bolts using the tool
4
(depending on
equipment).
F
Fit the security socket
5 on the
wheelbrace 1
to slacken the security bolt (if
fitted).
F
Slacken the other bolts (no more than a
1/4 turn) using the wheelbrace
1
only.
* Position R
for an electronic gearbox or
P for
an automatic gearbox.
Do not use:
- the jack for anything other than
lifting the vehicle,
- any other jack than the one
supplied by the manufacturer.