140
IX
D R I V I N G
To start the engine, press the
brake pedal and place the selec-
tor in position
P
.
Operate the starter.
When the engine is running,
place the selector on
R
,
D
or
M
as required.
Check, in the instrument panel,
the position engaged.
Release the brake pedal and ac-
celerate.
If the selector is not in position
P
,
a message "place automatic
gearbox in position
P
" appears
on the multifunction screen, ac-
companied by a beep and the
fl ashing of
P
on the instrument
panel.
Moving off
To avoid incoherence between
the position of the selector and
the actual position of the gear-
box, always exit from position
P
when you switch on the ignition
and press the brake pedal.
Otherwise, when the ignition is on or
the engine is running:
reposition the selector in position
P
,
put your foot on the brake pedal
and then select the gear you
want.
Park
To select position
P,
move the
selector back to the highest po-
sition (towards
R
), then push it
forwards and then to the left.
To exit position
P
, move the se-
lector to the right and then to the
position you want.
Only engage this position when
the vehicle is completely sta-
tionary. In this position, the front
wheels are locked. Make sure
that the selector is correctly po-
sitioned.
Reverse gear
Neutral
Only engage this position
when the vehicle is station-
ary. To prevent snatching,
do not accelerate too soon
after selection.
Never select position
N
if
the vehicle is moving.
Never select positions
P
or
R
if the vehicle is not sta-
tionary.
If, while the vehicle is moving, po-
sition
N
is engaged inadvertently,
allow the engine to idle before en-
gaging position
D
or
M
.
This position of the selector
is used to prevent the vehi-
cle from moving when you
are stationary.
that the selector is correctly po-
that the selector is correctly po-
CITROEN
that the selector is correctly po-
that the selector is correctly po-
compiled by C4owners.org
