94
III
Setting the time
Immediate start
Adjusting the operating
duration
After displaying the time, using
buttons 1, within 10 seconds press
buttons 4 and 5 simultaneously.
Press button 5 (ON) until the "OK"
message appears.
When the signal has been received,
the "OK" message is displayed
together with the operating duration.
Press buttons 1 to display the ope-
rating duration.
P R O G R A M M A B L E H E A T I N G
This symbol fl ashes.
Set the time using buttons 1. Press
buttons 4 and 5 simultaneously to
store the setting.
This symbol is displayed
(constant).
The heater starts and this
symbol is displayed.
To stop operation, press button 4
(OFF) until the "OK" message
appears
This symbol goes off.
If the "FAIL" message appears
during these operations, this indi-
cates that the signal was not
received. Go to a different location
and then repeat the procedure.
This symbol is displayed.
After displaying the operating
duration, within 10 seconds press
buttons 4 and 5 simultaneously.
This symbol fl ashes.
Set the duration using buttons 1
(adjustment in steps of 10 mins up
to a maximum of 30 mins).
Press buttons 4 and 5 simultane-
ously to store the duration setting.
This symbol is displayed
(constant).
The factory setting is 30 minutes.
https://www.automotive-manuals.net/
