CITROEN C4 SpaceTourer, Handbook

Page: 215 / 316

8
213
In the event of a breakdown
Putting the spare wheel back in
place
Since the width of the spare wheel is
smaller than the width of the wheels of
the vehicle, in the event of a puncture, the
punctured wheel must be stored in the boot.
F
Put the wheel back in its housing.
F
Loosen the nut on the bolt by a few turns.
F
Position the fastening device (nut and bolt)
in the middle of the wheel.
F
Tighten fully until the central nut clicks to
retain the wheel correctly.
F
Put the box back in place in the centre of
the wheel.
Spare wheel
Scan the QR code on page 3 to view
explanatory videos.
Access to tooling
(Depending on version. The full set of tools is
supplied with the spare wheel.)
The rest of the tools, the jack 3 and the wheel
bolt cover removal tool 4 , are stored in a box
attached to the spare wheel.
The assembly is secured under the vehicle by
means of a winch carrier system.
Procedure for changing a wheel with
a damaged or punctured tyre for the spare
wheel using the tools provided with the vehicle.
One part of the tools can be accessed from the
boot.
The immobilisation chock
2 as well as the
wheelbrace extension 6 are stored in the right-
hand section of the boot sill trim.
The wheelbrace
1 and the towing eye 7 are
stored in the left-hand section of the boot sill
trim.