CITROEN C-CITY28L, User Manual, Page: 22 / 68

22
If you store the bicycle, remember to regularly recharge the battery at least every two months, to avoid loss of battery
capacity.
1. Turn off the bike. Do not use the bike when charging the battery.
2. Ensure the charging port is dry.
The switch next to the charging port must can be in position “0” or “1” before recharging.
3. This switch activates the battery when it is in position “1”, and must be in position “0” when you do not intend to use th e bike
for a long period.
4. Open the protective plastic cover of the charging port and insert the charger plug into the bike charging port. Then, the other
end of the charger must be connected to the mains to activate the charger. Means: connect first the battery charger terminal
to the battery terminal, and then connect it to the 230V outlet.
5. The indicator light on the charger will be
red
: this grants that the charge is proceeding.
Charge the battery until the signal indicator light turns
from red
(during the charging procedure)
to green color
(charging
procedure is finished).
6. When the green light is on, the battery is fully charged. Too long charging time will affect the battery life. Close the protection
cover when the charging procedure is finished.
7. When charging is finished, remove the cable of the charger from the charging port of the bike.
Disconnect the plug from the 230V outlet and then disconnect the battery charger from the battery itself.
Close the protection cover. Move the switch to “1”.