CITROEN C 3 2020, Handbook, Page: 68 / 212

66
Safety
"RÖMER Baby-Safe Plus and its ISOFIX
base"
(size category:
E
)
Group 0+: from birth to 13 kg
Installed "rearward facing" using an ISOFIX
base which is attached to rings
A
.
The base has a support leg, height-
adjustable, which rests on the vehicle's floor.
This child seat can also be secured with a
seat belt. In this case, only the shell is used
and attached to the vehicle seat using the
three-point seat belt.
" RÖMER Duo Plus ISOFIX "
(size category:
B1
)
Group 1: from 9 to 18 kg
" RÖMER Duo Plus ISOFIX "
(size category:
B1
)
Group 1: from 9 to 18 kg
Suitable for forward-facing installation only.
Attached to rings A and ring B , referred to as
TOP TETHER, using an upper strap.
Three seat body angles: sitting, reclining,
lying down.
This child seat can also be used in seat
positions not equipped with ISOFIX
mountings. In this case, it must be secured to
the vehicle's seat by the three-point seat belt.
Adjust the front seat of the vehicle so that the
child's feet do not touch the backrest.
i-Size child seats
i-Size child seats have two latches that engage on the two rings A .
These i-Size child seats also have:
– either an upper strap that is attached to ring B .
– or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position.
Their role is to prevent the child seat from tipping forward in the event of a collision.
For more information on the ISOFIX mountings , refer to the corresponding section.
Installing universal, ISOFIX and i-Size child seats
In compliance with European regulations, this table indicates the possibilities for installing child seats secured using the seat belt and universally approved
(a) as well as the largest ISOFIX and i-Size child seats for the seat positions fitted with ISOFIX anchoring points in the vehicle.