28
5.
TROUBLSHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The machine is not working
Check if machine is plugged
into power outlet
Connect to power source
No electricity from power
outlet
Check the power outlet for
electricity
Main switch off
Check if main switch on the
side of machine is switched on.
ON/OFF switch damaged
Contact your customer service
representative.
The press elements are
blocked
Unplug the machine from its
electricity source andd remove
the object which is blocking the
machine in the press elements.
Safety detectors are
damaged.
Contact your customer service
representative.
Switching circuit is
damaged
Contact your customer service
representative.
Display shows “End position“
Magnet switch for the end
position is damaged
Contact your customer service
representative
Display shows “Feeder tube“
Feeder tube/Inlet tunnel
mounted incorrectly
Mount the Feeder tube/Inlet
basket according to the
instruction manual.
Display shows “Cross holder”
Cross holder mounted
incorrectly.
Mount the Cross holder
according to the instruction
manual.
Display shows “Fruit sieve
supporter”
Fruit sieve supporter
mounted incorrectly.
Mount the fruit sieve supporter
according to the instruction
manual.
Display shows “Front cover
right”
Front cover mounted
incorrectly.
Mount the front cover
according to the instruction
manual.
Display shows “Front cover
left”
Front cover mounted
incorrectly.
Mount the front cover
according to the instruction
manual.
Display show a error message,
although all parts are mounted
according to the instruction
manual.
Security-Magnet is loosen
or the magnet switch is
damaged.
Contact your customer service
representative.
