Chapter 3 Nortel T1 QSIG Trunk Integration
17
Adding a PRI Card
The following example shows how to add a PRI card using LD 17. For all other fields
not listed in the example, press
Enter
to use default values.
Adding a PRI D-Channel
The following example shows how to add a PRI D-channel using LD 17. For all other
fields not listed in the example, press
Enter
to use default values.
Prompt
Response
Description
REQ
CHG
Change data.
TYPE
CFN
Configuration data block.
CEQU
YES
Changes to common equipment.
DLOP
11
Digital Trunk Interface Loop.
MG_CARD
4 0 2
MG card assigned to superloop.
MODE
PRI
Mode of operation.
TMDI
YES
Card is TMDI card.
TRSH
0
Threshold.
Prompt
Response
Description
REQ
CHG
Change existing data.
TYPE
CFN
Configuration data block.
ADAN
NEW DCH 11
Add a primary D-channel (any unused SDI port.)
xx =
1-9 for Option 11C main cabinet,
11-19 for IP expansion cabinet 1,
21-29 for IP expansion cabinet 2,
31-39 for IP expansion cabinet 3,
41-49 for IP expansion cabinet 4.
Xx = 11-14, 21-24, 31-34, 41-44 of the first, second,
third and fourth Media Gateway, respectively.
CTYP
TMDI
Card type where:
MSDL = The NTBK51BA Downloadable D-Channel
Daughterboard.
TMDI = TMDI (NTRB21) card.
DES
T1_QSIG
Designator field.
USR
PRI
D-channel is for ISDN PRI only.
2.0 Mb only supports PRI or SHA users.
IFC
ISGF
Interface type.
