Safety – CAUTION!
z
This UPS utilizes voltages that may be hazardous. Do not attempt to
disassemble the unit. The unit contains no user serviceable parts.
Only factory service personnel may perform repairs.
z
Internal battery voltage is 24Vdc. Sealed, lead-acid, 6 cells battery.
z
Connection to any other type of receptacle other than a two-pole,
three-wire grounding receptacle may result in a shock hazard as well
as violate local electrical codes.
z
In the event of an emergency, turn the power switch to the “off”
position and disconnect the power cord from the AC power supply to
properly disable the UPS
z
Do not allow any liquids or any foreign object to enter the UPS. Do not
place beverages or any other liquid-containing vessels on or near the
unit.
z
This unit intended for installation in a controlled environment
(temperature controlled, indoor area free of conductive contaminants).
Avoid installing the UPS in locations where there is standing or
running water, or excessive humidity.
z
Do not plug the UPS input into its own output.
z
Do not attach a power strip or surge suppressor to the UPS.
z
Do not attach non-computer-related items, such as medical
equipment, life-support equipment, microwave ovens, or vacuum
cleaners to UPS
z
To reduce the risk of overheating the UPS, do not cover the UPS’
cooling vents and avoid exposing the unit to direct sunlight or
installing the unit near heat emitting appliances such as space
heaters or furnaces.
z
Unplug the UPS prior to cleaning and do not use liquid or spray
detergent.
z
Do not dispose of battery or batteries in a fire. The battery may
explode.
z
Do not open or mutilate the battery or batteries. Released
electrolyte is harmful to the skin and eyes. It may be toxic.
z
A battery can present a risk of electrical shock and high short circuit
current. The following precautions should be observed when working
on batteries :
1) Remove watches, rings, or other metal objects from the hand.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not lay tools or metal parts on the top of batteries.
5) Disconnect charging source prior to connecting or disconnecting
batteries terminal.
