Checking the reference position
1.
Pull the crown out to position
1
.
The second hand indicates the alarm setting (
ON/OFF
).
2.
Rotate the crown to make the second hand point the flight
mode setting (
ON/OFF
).
• Each time you rotate the crown, the second hand moves as follows:
Alarm setting
(
ON/OFF
) →
ACT
→
flight mode setting
(
ON/OFF
) → (back to the top).
3.
Press and hold the button for 5 seconds.
The hands and indication start to move to the current reference positions
stored in memory.
• Release the button as the second hand start to move.
4.
Checking the reference
position
Correct reference positions:
•
Hour, minute and second hands:
0 hour 00 minute 0 second
•
Date indication: midway
between “31” and “1”
When the current reference
position is different from the
correct one, proceed to step 4 of
“Correcting the reference position”.
5.
Push the crown in to position
0
to finish the procedure.
Adjusting the time and calendar manually
1.
Pull the crown out to position
1
.
The second hand indicates the alarm setting (
ON/OFF
).
2.
Rotate the crown to make the second hand point “
ACT
”
(0-second position).
• Each time you rotate the crown, the second hand moves as follows:
Alarm setting
(
ON/OFF
) →
ACT
→
flight mode setting
(
ON/OFF
) → (back to the top).
3.
Press and hold the button for 2 seconds or more.
• Release the button after the second hand swings left and right and points
“
ACT
” (0-second position).
4.
Press the button to change the target to correct.
• Each time you press button , the target changes as follows.
Minute
→
hour/date
→
year/month
→ (back to the top)
• The hands and indications slightly move when selected to show they
become adjustable.
5.
Rotate the crown to adjust the hand/indication.
• Minute/second hands and hour hand/date indication synchronously move
respectively.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
• When you rotate the crown quickly a few times, the hands and date
indication will move continuously. To stop the rapid movement, rotate the
crown in either direction.
12
1
2
3
4
5
6
7
8
9
10
11
“Month” corresponds to one of
the 12 zones shown in the figure
below.
Each number means month.
The year corresponds to the
years since leap year and is
indicated with the position of the
second hand.
Years since leap year:
0
(Leap
year)
0
Years since leap year:
1
1
Years since leap year:
2
2
3
Years since leap year:
3
6.
Repeat steps 4 and 5.
7.
Push the crown in to position
0
in accordance with a reliable
time source.
W410 Abbreviated instruction
12
6
9
31
1
31
1
IN
FO
ACT
CA
LL
OFF
ON
N
O
F
F
O
D
N
I
F
N
O
FF
O
31
1
31
1
