- Eng 10 -
- Eng 11 -
Deutsch
English
Español
Português
Italiano
中文
Français
English
Español
Português
Deutsch
中文
Français
Italiano
LOADING THE BATTERIES
REMOVING THE BATTERIES
• When the icon
is displayed or nothing appears in the display, replace the old
batteries with four new ones. All four batteries should be changed at once.
• The memory is erased if the batteries are removed for replacement. It is
recommended to make note of the data stored in memory prior to changing
batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR6) and manganese (R6P) batteries together.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than speci
fi
ed.
• When disposing of used batteries, comply with governmental regulations or
environmental public institution’s rules that apply in your country/area.
3
Close the battery cover.
Fitting the lugs of the cover
at the mating recesses of the
battery compartment body, push
the hook to close the cover.
Fit the lugs (projections) at
the recesses.
LOADING THE BATTERIES
(Batteries supplied with the unit should be loaded in compartment before you use
the blood pressure monitor.)
1
Open the cover of battery compartment.
Pressing the hook down, pull the cover toward you to open.
2
Place batteries in the compartment.
Put the batteries paying attention to the positive and negative terminal symbols
and
.
Battery
cover
Lug (projecting section)
Battery
compartment
4 “AA” batteries
* If the Blood pressure monitor
is left unused for an extended
period of time, the batteries
should be removed from the
compartment.
Hook