3. Switching Modes (Functions)
In addition to the time mode, this watch has six
other modes (functions): Calendar, Alarm 1,
Alarm 2, Chronograph, Timer and Zone Setting.
Each press of the
M
button switches the mode
in the following sequence.
* If the watch is left in the Alarm 1, Alarm 2, or Zone
Setting mode for approximately 2 minutes, it
automatically returns to the time mode <TME>.
4. Displaying the Time and Calendar of Cities
Worldwide
1. Press the
M
button to
select the <TME> mode
or <CAL> mode.
2. Each time the
M
button
is pressed, a city’s name
and its time (calendar)
are displayed sequentially.
Cities can be displayed in
the order No. 2
➝
3...31
➝
1
➝
2 (eg., LON
➝
UTC
➝
BUE...PAR
➝
LON).
To switch to the opposite display sequence, press
the
A
button and the
B
button simultaneously.
The Time Difference Between the Cities and
UTC Time
As of 1997
* Cities (regions) with summertime are indicated by
the O symbol, and cities (regions)with no
summertime system are indicated by the X symbol.
* Please note that time difference and summertime
for cities are subject to change.
5. EL Illumination Function
<What is EL?>
Electroluminescence is a physical phenomenon
whereby electrical voltage is directly converted
into light in a thin film solid. This watch utilises
an EL panel for the illuminating function
<How to Light the Illumination>
The EL illumination comes on in the following
situations.
1. When the
A
button is pressed during the normal
<TME> mode, <CAL> mode, or <SET> mode
displays.
2. During split time display or stop in the <CHR>
mode.
6. Setting the Analog Time
In the case of watches where the crown is a screw
type, perform the operation after loosening the
screw. Make sure to tighten the screw firmly
when the operation has been completed.
1. When the second hand
comes to the 0-second
position, pull the crown
out to the position for
time adjustment.
2. Turn the crown to align
with the correct time.
3. Return the crown to its
normal position.
7. Setting the Digital Time <TME>
When the time is set for one of the 30 cities and
UTC (Universal time coordinated) time, the time
is automatically set for the cities.
1. Press the
M
button to select the <TME> mode.
2. Press the
B
button to display the city whose time
you want to adjust.
3. Press and hold the
B
button for 2 seconds or
more. “S.T. (Summertime abbreviation)” and “ON”
or “OFF” flashes. Press the
A
button to select
summertime (ON) or (OFF) for the city.
4. Each time the
B
button is pressed, the flashing
figures change in this sequence [Summertime
Seconds
➝
Minutes
➝
Hour
➝
12 hours/24 hours]
sequence. Make the figures that you want to
adjust flash.
What is summertime?
Summertime or “Daylight
Saving Time: DST” has been
inaugurated in many countries
in order to efficiently utilise
daylight by advancing the clock
a certain amount of time, in
relation to the normal time,
during the summer. (This watch
advances the time by 1 hour.)
