— 29 —
5. SETTING DIP SWITCHES
5.1 Location of DIP Switches
DIP switch is located at the top of the printer.
DIP switch setting with the printer power on is not valid. After setting, turn the
printer power on.
1
Turn the printer power off.
2
Remove the screw from the DIP switch cover. (Be sure not to have the screw be lost.)
3
Move the DIP switch cover toward the screw mount and then remove it in the arrow
direction.
4
Set the DIP switch.
5
After setting, remount the cover and screw it.
DS2
DS1
8
1
CAUTION
• Pay attention to the edge of the DIP switch cover.
• The screw used is M2
×
3 mm. Do not use screws of other size. (If the screw is lost, use the
screw of the same size. Do not use longer size.)
• Turn the printer power off before setting DIP switches. Otherwise, a failure may occur.
• Do not use keen edged tool when setting the DIP switch.
• Do not use with the DIP switch cover removed.