2nd time correction(
〃
)
: Pull out the crown to the first click position,
turn crown counter-clockwise.
Power conservation switch : Pull out the crown to the second click position
Second hand stopping devise
: Pull out the crown to the second click position
2. SEPARATED PARTS
* Setting stem
065-992
Length of movement center to stem end...23.00mm
Thread.................................
Ф0.9 x 10.5mm
3. Others
* Measurement of time rate
The unit(gate) time of measurement must be set at "10s " or integer fold
value of 10s owing to the DFC system, and the measurement must be
performed in the form of complete watch.
* Marking on movement
MIYOTA CO. UNADJUSTED
NO JEWEL JAPAN GP**
* Typical clearance
Mov't - Caseback
minimum 200 µm or more
Top of hands - Glass
300 - 400 µm *
* depending and subject to the glass and case structure, and hand length
4. Notice Of Casing
The interval between Dial and Glass end should be 150
μ
m to avoid breakage
under drop.
