manualshive.com logo in svg

Citizen iDP-3540/3541, User Manual

The Citizen iDP-3540/3541 is a high-quality receipt printer designed for versatility and efficiency. Ensure seamless operation with the comprehensive User Manual available for free download from our website. A must-have resource for maximizing the full potential of your printer, helping you navigate its features effortlessly.

Share
Download
background image

iDP-3540/41 User’s Manual

 CITIZEN

13/48

5-3. Parts Descriptions

(1) Power Cord 

Insert the plug end into an electric outlet.

(2) Power Switch              

Power is supplied to the printer by turning this switch on.

(3) Power Lamp               

This lights up when the power switch is “ON” and goes out

 

when turning “OFF”.

(4) SEL / ALARM Lamp        

This lights up when the printer is in SELECT state
(ON-LINE) and goes out when in DESELECT state (OFF-
LINE). The printer can print out the data only when this
lamp is on.
This lamp may blink on the following occasions.

a)

 

When the paper roll in coming to near-end, the SEL /
ALARM lamp keeps blinking at interval of 1.0 second.

   In this case, change the roll paper.
b)

 

When the printer is in alarm state, this lamp keeps
blinking at interval of 1/4 second.

Remove the cause for alarm and press the SEL switch.

(or re-switch the power on)

(5) LF Switch            

Paper feeding is performed when this switch is pressed
(in DESELECT status only), this is used when inserting the
paper and for spacing up etc.

(6) SEL Switch               

When this switch is pressed, the printer enters SELECT

 

(ON-LINE) status. When pressed again, the printer enters

 

DESELECT (OFF-LINE) status.
This switch is also used when clearing an alarm condition.
And if this switch is pressed when printing, the printer
enters DESELECT status, after all the data in the buffer is
printed.

(7) I/F Connector              

Connects through a cable to a computer etc. Please be

 

certain that power to both the printer and the computer are

 

turned off when connection is made.

(8) Cash Drawer Connector     

To be used to control the P.O.S. cash drawer.

(9) Printer Cover              

Open when replacing the Ribbon Cassette.

(10) Manual Paper Feed Knob  

Use to adjust the paper position (Available only on pin

 

tractor paper feeding model).

(11) Rear Cover               

Cover for paper roll.

(12) Winder Connector          Use Model CBM AW-3
(13) Stacker                  

Basket for fan-fold paper.

Summary of Contents for iDP-3540/3541

















































Reviews:

No comments

Related manuals for iDP-3540/3541

Canon imagePROGRAF iPF8400 Basic Manual preview
imagePROGRAF iPF8400
Brand: Canon Pages: 157
Canon JX210P On-Screen Manual preview
JX210P
Brand: Canon Pages: 91
Oki ML280 Elite Parts List preview
ML280 Elite
Brand: Oki Pages: 6
Oki ML1120 Safety & Warranty preview
ML1120
Brand: Oki Pages: 32
Oki ML1120 User Manual preview
ML1120
Brand: Oki Pages: 52
Oki ML8810 Installation Instructions preview
ML8810
Brand: Oki Pages: 4
Oki ML520n Guía Del Usuario preview
ML520n
Brand: Oki Pages: 64
Oki ML520 Service Manual preview
ML520
Brand: Oki Pages: 269
Oki C9200 Replacement Manual preview
C9200
Brand: Oki Pages: 2
Oki C9200 Setup Manual preview
C9200
Brand: Oki Pages: 32
Oki C9200 User Manual preview
C9200
Brand: Oki Pages: 2
Oki C9200 Parts List preview
C9200
Brand: Oki Pages: 33
Oki B721dn Instructions Manual preview
B721dn
Brand: Oki Pages: 8
Oki ML690 Manual De L'Utilisateur preview
ML690
Brand: Oki Pages: 101
Oki ML690 Guía Del Usuario preview
ML690
Brand: Oki Pages: 104
Oki ML690 User Manual preview
ML690
Brand: Oki Pages: 99
Oki ML620 Manual Do Usuário preview
ML620
Brand: Oki Pages: 112
Oki ML620 User Manual preview
ML620
Brand: Oki Pages: 100

Brands by name

Popular brands

Load more brands