3
Adjusting the time/calendar manually
1
Pull the crown out to position
2
.
2
Press the lower right button
A
briefly.
The second hand moves to the 0 second position.
3
Rotate the crown to adjust the minute.
• The second hand rotates around once and the minute hand
moves one minute.
• When it passes “0:00:00,” the date advances by one day.
Be aware of the AM/PM status when you adjust the time.
• If you spin the crown quickly a few times, the hand will
move continuously. To stop it, rotate the crown in either
direction.
4
Press the lower right button
A
briefly.
The hour hand moves slightly.
5
Rotate the crown to adjust the hour and date.
• The hour hand and the date indication work together.
• If you spin the crown quickly a few times, the hand will
move continuously. To stop it, rotate the crown in either
direction.
6
Press the lower right button
A
briefly.
The second hand indicates the current setting of the month
and year.
7
Rotate the crown to adjust the month and year.
• The year and month are indicated by the second hand.
NO
ON
OFF
RX
OK
-7
-
9
-11 +12 +11
+
9
+
7
-5
-3
-1 O +1
+
3
+
5
7
Dec.
Jan.
Feb.
Mar.
Apr.
May
Jun.
Jul.
Aug.
Sept.
Oct.
Nov.
The position of the second hand shows the month.
e.g.
When it is April in the second year since the last leap year.
Leap year
1st year since leap year
2nd year since leap year
3rd year since leap year
OFF
-7
-9
-11 +12 +11
+
9
+7
-5
-3
-1 O +1
+
3
+
5
7
Each minute mark denotes the number of years since the last
leap year.
8
Push the crown in to position
0
to finish the procedure.
The time and date are indicated.
Checking and correcting the current reference position
If the time or date is not shown correctly even after proper
reception of the time signal, check whether the reference position
is correct or not.
What is the reference position?
The base position for all the hands to indicate the time and date.
•
For the time indication: “0:00:00”
•
For the date indication: Between
“31” and “1”
If the time and date indications are off
from the correct reference position, the
watch will not indicate the time and
date correctly.
1
Pull the crown out to position
1
.
2
Press and hold the lower right button
A
for five or more seconds.
The hands move to the “0:00:00” position. The date indicator
moves to indicate the current reference position.
• No operations are available while the hands and date
indicator are moving.
Reference
position
Next operation
Correct
Push the crown in to position
0
to finish the
procedure.
(You do not need to correct the reference
position.)
Incorrect
Correct the reference position.
(Proceed to step 3.)
3
Pull the crown out to position
2
.
The hour hand moves slightly.
4
Rotate the crown to adjust the date indication to halfway
between “31” and “1.”
• The hour hand and the date indication work together.
• If you spin the crown quickly a few times, the hand will
move continuously. To stop it, rotate the crown in either
direction.
5
Push the crown in to position
0
to finish the procedure.
Correction of the reference position is finished and the time is
indicated.
Resetting the watch—All Reset
1
Pull the crown out to position
2
.
2
Press and hold the lower right buttons
A
for seven or more
seconds
, then release them.
The hands move to the “0:00:00” position and the watch is
reset.
• If the hands do not move, perform step 2 again.
After performing All Reset
You must set the watch again following the procedure below.
• Correct the current reference position.
• Set the World Time.
• Adjust the time/calendar.
CITIZEN WATCH CO., LTD.
H060 Abbreviated instruction
NO
ON
OFF
RX
OK
-7
-
9
-11 +12 +11
+
9
+
7
-5
-3
-1 O +1
+
3
+
5
Correct reference position
