5/12
CITIZEN Eco-Drive Riiiver W510 Instruction manual
Checking the power reserve on the watch
• Power reserve is indicated in 29 levels.
1
Press the lower right button
A
repeatedly to make the function hand
indicate power reserve.
Function hand
Power reserve level
Indication of power reserve on the watch
Power reserve is indicated with the function hand in percentage.
Indication
Duration (approx.)
Meaning
When using
connection
When not using
connection
100%
7 months
1 year
Power reserve
is sufficient.
50%
5 months
9 months
Charged about
half amount.
0%
Connection is
unavailable.
18 days
Charge
immediately.
• At 0%, the second hand starts to move once every two
seconds (“
When the watch reaches a low charge state (insufficient
”).
• See the table of “Standard use with the smartphone” in “
” for details
such as usage conditions of “When using connection” of duration.
• Connection is disconnected when the power reserve becomes “0%”. However, basic
functions of the watch are still available.
• Some basic functions become unavailable while the insufficient charge warning
function is active.
Using the activity monitor
An acceleration sensor is equipped with this watch and your activity is automatically
measured and the data are stored.
When the watch and the smartphone are connected, the activity data are send to the
smartphone. The data can be browsed and saved on the dedicated app.
• The activity data are stored in the watch for 2 weeks and removed from older one.
1
Start the dedicated app.
2
Press and release upper right button
B
and lower right button
A
at the
same time.
The watch and the smartphone are connected.
3
Display the screen of activity monitor.
Tap the icon.
4
Check information on the screen of activity monitor.
Achievement level
Target value set is supposed 100%.
• Tap [Graph] to indicate activity amount
with daily/weekly/monthly line graphs.
* Software technologies provided by ACOS CO., LTD (
) are used on the activity monitor on this
watch.
* Activity amount indicated on the activity monitor may differ form the actual one depending on usage
of the watch. Please use this table as a reference only.
Data of the activity monitor
To use the activity monitor correctly, it is required to enter personal data of your
body (sex, height, weight and birth date).
These data are stored in the watch and the app together with activity data (count of
steps, calorie consumption, etc.).
See “
Remove the data stored in the watch
” to remove the data above.
