<When the function hand points at "NG"
(58 seconds)>
The watch will not shift to the diving mode
because of insufficient charging. When the
watch is in this status, it cannot be used
for diving because its depth meter function
won't be activated.
If the function hand points to "NG" during a
dive, immediately stop using relying on the
watch for depth measurement.
x
Use the indication of the charge level as a reference only.
x
If the watch is exposed to strong light for charging the battery,
the function hand may temporarily indicate "LV.I" or "LV.2" despite
insufficient charging. If the function hand goes to "LV.1" or "LV.2"
from "NG" position in a short time, you need to pay careful
attention to charging conditions.
It is recommended that you keep the battery sufficiently charged all
the time but especially before using the watch for diving. Always
check the indication of charge level carefully just before diving.
(For details of charging time, refer to "C. Time Required for
Charging".)
Insufficient charge warning indication -
Made hand: DV position, Function hand: NG
position-
Whenever the battery power becomes
insufficient for operation, the watch is
automatically shifted to the Time mode
regardless of the currently set mode and the
second hand goes for 2-second interval
movement. (insufficient charge warning
indication)
If the watch is left in this condition
without recharging for another two days, the
watch will stop.
• If the watch falls into such condition, the
time measurement will be discontinued in the
chronograph mode.
• While the watch is falling into the
insufficient charge warning indication, all
button operations are ineffective except the
maximum depth operation.
Insufficient charge warning function
Since the watch continues accurate indication of the date and time even in
the insufficient charge warning indication, the watch will recover normal
operation if it is exposed to light sufficient for charging the battery.
For using the watch the watch for diving, sufficiently charge the battery
until the function hand indicates “LV.1” or “LV.2” on the charge level.
Return to Table of Contents
Return to Table of Contents
