Citizen E610 Instruction Manual Download Page 9

Page: 9 / 107

110

Safety precautions

This manual contains the following instructions that should be strictly followed at all times to

prevent injury to yourself and other persons as well as damage to property.

Injuries and damage that might be caused by using the watch improperly or neglecting

any of the instructions or precautions contained in this manual are classified with the

following symbols.

Important instructions that should be followed are classified with the following symbols.

DANGER
WARNING
CAUTION

Highly likely to cause death or serious injury

Can cause serious injury or death

Can or will cause minor or moderate injury or damage

Warning (caution) symbol followed by instructions that should

be followed or precautions that should be observed.
Warning (caution) symbol followed by prohibited matters.

Summary of Contents for E610












































































































Search results

Summary of Contents for E610

Reviews:

Related manuals for E610

Brands by name

Popular brands

Citizen E610, Instruction Manual

Search results

Summary of Contents for E610

Reviews:

Related manuals for E610

Brands by name

Popular brands