Citizen E068 Instruction Manual Download Page 3

5

4

7

7

SUN

W

W

Setting the time

1. Stop the second hand by pulling the crown out to the 2nd click (time setting position).
2. Turn the crown to set the time.
3. The watch will start after the crown is firmly pushed back into its normal position.

W

W

Setting the calendar

1. Pull the crown out to the 1st click (calendar setting position).
2. Set the desired date by turning the crown counterclockwise.
3. Set the desired day of the week by turning the crown clockwise.
• In the case of date display models, turning the crown clockwise will result in the loose

play of the crown.

4. After you have set the calendar, be sure to press the crown back to its normal position.
• Do not adjust the calendar when the watch is reading as below. Otherwise the

calendar may not change correctly.
* Date display models ..... between 9:00 pm and 1:00 am
* Date, day of the week display models ..... between 9:00 pm and 4:00 am

Time 
setting
position

Time 
setting
position

Calendar setting
position

Crown

Date

Solar cell

Normal position

[2] Models with calendar (date and weekday) display

* If your watch has a screw-type crown, lift up the crown to loosen it before

operation. Be sure to press the crown down firmly after operation.

[Date display models]

[Date, day of the week 

display models]

Solar cell

Crown

Date, day of the week

Normal position

Calendar setting
position

Summary of Contents for E068















Reviews: