<How to Switch the Tap Switch
“ON” and “OFF”>
• When the watch is in time
adjustment mode, press button
A
to switch the tap switch ON
and OFF alternately. When the
tap switch is ON, “ON” appears
next to the TAP mark.
(1) Press button
M
to switch to
time mode.
(2) Press button
B
for 2 seconds or longer to put
the watch in time adjustment mode.
(3) Press button
A
while both “TAP” and “TME” are
flashing to switch ON and OFF.
(NOTE) Each time you press button
B
again,
the adjustment position shifts through
summertime, seconds, minutes, hours,12H/24H.
(4) Press button
M
to return to normal Time display.
(2) How to switch the display by pressing
buttons
• Regardless of whether the tap switch is ON or
OFF, the display changes each time you press
button
B
during normal Time or Calendar display.
(3) Switching the digital display
4. Setting the Analog Time
(1) Pull the crown out so that the second hand
stops at the “0” position.
(2) Turn the crown and set the hands to the correct
time.
(3) After setting the time, press the crown back in to
start the watch.
✩
Stop the second hand at the “0” position and then
press the crown when the digital display reaches
zero seconds. The second hand will start to
move in synchronisation with the digital display.
5. Switching Digital Functions (Modes)
In addition to Time mode, this watch has 4 other
modes; Calendar, Alarm, Chronograph and Timer
Each time you press button
M
, the mode changes.
6. Using Digital Functions (Modes)
• Press the button
A
(or kept pressing) while the
watch is in normal Time display to switch the EL
light on.
<To Set Time>
(1) Press button
B
for at least
2 seconds or longer during
Time mode (normal display) to
change to adjustment mode.
The time display and graphic
display will disappear and
“TAP” and “TME” will flash.
(2) Pressing button
A
while “TAP” and “TME” are
flashing to switch the tap switch ON and OFF.
(3) Press button
B
while “TAP” and “TME” are
flashing to change the area of the display that is
flashing. Press button
B
until the position you
want to adjust is flashing.
(4) Press button
A
to adjust flashing section.
• Press and hold button
A
for rapid
advancement. Summertime and 12H/24H
change each time the button is pressed. There
is no rapid advancement for these functions.
(5) Press button
A
while seconds are flashing,
seconds will return to “00” and restart.
• If seconds show 30 through 50, minutes
display will advance one minute.
(6) Press button
M
to return to normal Time display.
You may also set the analog and digital displays
for different times as a dual time display.
Time Mode
A
• Auto-Return to the normal Time display (Full
Time Display) will be activated when the watch
is left in the adjustment mode for about 2
minutes.
• Make sure that the AM/PM indication is correct
when setting the time in the 12-hour display
system.
• Instant Manual Return to normal Time display
(Full Time Display) can be made by pressing
button
M
in Time adjustment mode.
