– Eng 2 –
Ру
сский
中文
Fr
ançais
Italiano
Deutsch
Po
rtuguês
Español
English
12. Without regular recalibration, the results may not be accurate. Every CTD505 is
calibrated right after production. See “Warranty and Recalibration” for details.
13. Keep the CTD505 away from sunlight and dusty places.
Important Notice:
The CTD505 does not require a probe cover during use. It is important to
clean and disinfect the CTD505 before and after each use. See “Cleaning and
Disinfection” for details.
For measurement:
• When asleep, pressure on the ear may cause higher-than-normal temperature.
Wait a few minutes, and then measure again.
• Clean your external ear before measuring. To ensure an accurate result, keep
your ear free from obstructions or excess earwax.
• The measuring results from the left and right ears may differ slightly. We
recommend measuring in the same ear.
• Before measuring, the user and the CTD505 should be in a steady room
temperature for at least 30 minutes. The user should also rest for 30 minutes
after exercising.
HOW TO OPERATE
1. Press the
|
/O
button. The backlight is switched on for
approximately 2 seconds. The LCD screen displays all digital
segments.
2. If the CTD505 has saved past results, the LCD screen
automatically displays the latest result.
3. When
fl ashes with a short beep, the CTD505 is ready to use.
1. To improve accuracy, follow the illustrations below. For adults, pull the ear up
and back. For infants and children, pull the ear back.
Adults
Infants and Children
2. Fit the probe tip into the ear canal, and then press the
START
button. Release the button and wait a few seconds
until you hear a long beep.
3. Take the CTD505 out of the ear canal. The LCD displays
the latest measuring result. The backlight is switched on for approximately 5
seconds. Without any operation, the CTD505 automatically shuts off after 1
minute.
Note:
Before re-measurement, wait 1 – 3 minutes.
