- Eng 24 -
- Eng 25 -
English
■
Method of deleting the data
<When you use the thermometer again after leaving it unused for a
long period or when a person other than you uses it.>
1.
Press the POWER/MEASURE button for 1 second to turn on the power.
2.
Press and hold both right (
s
) and left (
t
) shift buttons simultaneously for 1 second,
and the display contrast adjustment screen appears.
3.
Press the SET button. After checking that the trumpet mark is displayed, press the SET
button again.
4.
Press the right (
s
) or left (
t
) shift button, and “CLEAR”
blinks.
5.
Press the SET button, and “CLEAR” lights up.
6.
Press the SET button again, and all the measurement data
is deleted. It takes several seconds to delete the data.
* To stop deleting the data halfway, press the POWER/
MEASURE button.
7.
Press and hold the POWER/MEASURE button for 1 sec-
ond to turn off the power.
REPLACING BATTERY
S
Function indicating low battery voltage
Lighting of battery mark: The battery voltage is low. Replace the battery immediately.
Blinking of battery mark: The battery mark blinks for 4 seconds. The battery is almost
dead. Replace it immediately.
Display condition:
If the display is faint or cannot be read, replace the battery im-
mediately.
* Since the battery attached to the purchased thermometer is for monitoring, it may be
used up before the standard life.
* Dispose of the used battery correctly to protect the environment.
■
How to replace battery
• Referring to “How to set battery” on page 5, replace
the battery.
• Remove the used battery with a toothpick.
• Use the specified lithium battery (CR2032).
Summary of Contents for CT915
Page 1: ... Eng 1 English INSTRUCTION MANUAL FOR CT915 ...
Page 18: ......
