![Citizen CT-S601 User Manual Download Page 57](http://html1.mh-extra.com/html/citizen/ct-s601/ct-s601_user-manual_2610190057.webp)
— 54 —
Note:
*1: If print data is very dense, the print head is hot, data transmission is slow, or some other conditions,
the motor and printing may occasionally stop which causes white stripes in the printout. To print
high-density data, set MSW2-3 (Spool Print) to ON to reduce striping, although this increases the
time before printing starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
*2: The values for memory switches MSW7-X are only effective when DIP switch no. 1 is set to OFF.
MSW10-4
Old Command
Invalid
Invalid, CBM1, CBM2
MSW10-5
Buzzer Event
All Event/
Error
All Event/Error, Not by C.Open, Not by C.Open/PE
MSW10-6
Buzzer Sound
Tone 2
Tone 1, Tone 2, Tone 3, Tone 4
MSW13-1
Security/Target
Low/All
Low/All, Mid/All, Mid/Paired only, Hi/All, Hi/Paired
only
MSW13-5
BT Device Scan
Discoverable
No Response, Discoverable
MSW13-6
Auto Reconnect
Valid
Invalid, Valid
Switch no.
Function
Initial setting
Setting value