39
—
—
4.5 Error Indications
Paper End
If the paper ends, the ERROR LED lights and a buzzer sounds. Load a new paper
roll. The buzzer may not sound depending on the memory switch setting.
Cover Open
If the cover is opened, the ERROR LED lights and a buzzer sounds.
The buzzer may not sound depending on the memory switch setting.
Do not open the cover during printing. If the cover is accidentally opened, the
ERROR LED flashes. Check the paper, pull it straight out of the printer by a couple
of centimeters, and then close the cover. Printing restarts. A command must be sent
to restart printing depending on the memory switch setting.
Cutter Error
If the auto cutter stops due to paper jamming, etc., the ERROR LED flashes.
Remove the cause and press the FEED key. If the auto cutter still does not move
and the paper cover cannot be opened, refer to “Clearing a Cutter Error.”
Refer to 4.2 Clearing a Cutter Error
Print Head Hot
Dense printing, heavy black printing, and continuous printing in a high temperature
environment increase the temperature of the print head. When the print head
exceeds a certain temperature, the printer stops printing and waits until the
temperature of the print head decreases. The ERROR LED flashes during this time.
When the temperature decreases, printing restarts automatically.
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
