Citizen CT-D150, Command Reference Manual

Page: 87 / 512

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
CT-D151/E651
- 86 -
ESC ˜ J n
(Valid in CBM1000-Compatible Mode)
[Function] Specifies/cancels printing in red (black-based paper)
[Code] <1B>H<7E>H<4A>H<n>
[Range] 0
≤n≤255
[Outline] [The specification which is common to the model]
• Specifies or cancels printing in red.
• Red printing is valid on black-based thermal paper. Specifies or cancels printing in black on red-based
thermal paper.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
Function
black-based paper red-based paper
0
Specifying red printing. Specifying black printing.
1
Canceling red printing. Canceling black printing.
[Caution] [The specification which is common to the model]
• Valid when 2-color paper is specified by the GS ( E command.
• This command must not be used for normal thermal paper.
• Conducting pulse amount after cancellation is standard value. At the time of setting, conducting pulse amount
is increased to change the coloring.
• In case of MSW3-7=OFF, this command is invalid.
[Default] n=0
[Sample Program]
LPRINT CHR$(&H1B);"
˜
";"J"; CHR$(1);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H1B);"
˜
";"J"; CHR$(0);
LPRINT "AAAAA"; CHR$(&HA);
[Print Results]
* When dedicated thermal paper (black-based paper) is used.
ＡＡＡＡＡ
ＡＡＡＡＡ
Black printing
Red printing