Citizen CL-E321 User Manual Download Page 53

Page: 53 / 101

—

1. Turn off the power to the printer and host computer.
2. Insert the cable into the appropriate interface port at the back of the printer.

Tighten any locking screws to secure the cable.

USB cable

LAN cable

Serial cable

3. Insert the other end of the cable into the appropriate interface port in the host com-

puter.

Tighten any locking screws to secure the cable.

Using an Ethernet connection

Configure network settings as necessary.

Refer to 5. Configuring Ethernet Network Settings Using Network Seeker

CAUTION

To check the current Ethernet settings, press the Ethernet panel button located next to the

Ethernet interface to printout the settings.

To initialize Ethernet settings, press and hold the Ethernet panel button for at least 3 seconds.

Once the buzzer emits a short tone, press and hold the Ethernet panel button again within 3
seconds for at least 3 seconds.

Summary of Contents for CL-E321






































































































Search results

Summary of Contents for CL-E321

Reviews:

Related manuals for CL-E321

Brands by name

Popular brands

Citizen CL-E321, User Manual

Search results

Summary of Contents for CL-E321

Reviews:

Related manuals for CL-E321

Brands by name

Popular brands