- Eng 9 -
English
Español
Português
Français
Py
сский
中文
한국어
- Eng 10 -
한국어
中文
Py
сский
Français
Português
Español
English
REMOVING THE BATTERIES
• When the icon
is displayed or nothing appears in the display, replace the old
batteries with four new ones. All four batteries should be changed at once.
: The remaining capacity of the batteries is inadequate.
• Adjust the clock after changing the batteries.
• The data stored in the memory is not deleted by changing the batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR6) and manganese (R6P) batteries together.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than speci
fi
ed.
• When disposing of used batteries, comply with governmental regulations or
environmental public institution’s rules that apply in your country/area.
2
Plug the AC adapter into a mains power outlet.
• If you plan to use the AC adapter for an extended period of time, remove the
batteries. If the batteries are left in the compartment, electrolyte may leak from the
batteries and cause a fault in the blood pressure monitor.
• It is recommended that batteries are in the unit when using the AC adapter. If
there are no batteries in the unit when the AC adapter is disconnected from either
the power outlet or the unit itself, date and time settings will be lost.
• Plug the AC adapter into the socket, where you can easily plug off soon and
safely in times of trouble.
• When disconnecting the AC adapter, unplug the AC adapter from the main
power outlet, and then unplug the AC adapter plug from the socket on the blood
pressure monitor.
1
Insert the AC adapter plug into the socket on the blood pressure
monitor.
AC adapter
socket
The dedicated AC adapter (model:AC-230CZ) for the CHU503 is optional.
The AC adapter is available from retailers stocking CITIZEN digital blood pressure monitors.
Using the optional dedicated AC adapter (model:AC-230CZ) for the CITIZEN blood
pressure monitor (CHU503) allows you to measure your blood pressure without
having to worry about the amount of remaining charge in the batteries.
Warning
The
CHU503
and AC-230CZ should be used indoors in dry
location.
USING AC ADAPTER (OPTION)
AC adapter
plug
AC adapter
mains power
outlet
* Make sure there is no
obstruction within the
immediate vicinity of
the AC adapter so that
it can be immediately
unplugged from the
mains power outlet.
TIME ADJUSTMENT
Setting the clock enables measurements to be accurately recorded.
The monitor can record the date and time of measurement as well as the
measurement results. Be sure to set the clock after inserting the batteries. Set the
date
fi
rst and then the time.
* When you install the batteries for the
fi
rst time, the monitor will display the
clock setting screen. You do not need to perform step 1. Proceed to step 2.
If you set the clock and change its setting, start from step 1.
1
Press and hold the
Date/Time Set switch for
approximately two seconds.
The “year” indicator blinks.
2
Press
the
Adjust switch to adjust the
“
year
”
.
Press
Adjust switch to increase the number by one.
(The year can be adjusted in the range of 2013-2042.)
Press
Date/Time Set switch to confi rm the setting.
The “year” is set and the “month” indicator blinks.
*
You can fast-forward the numbers in display by
pressing and holding
Adjust switch.
3
Press
the
Adjust switch to adjust the “month”.
Press
Adjust switch to increase the number by one.
Press
Date/Time Set switch to confi rm the setting.
The “month” is set and the “day” indicator blinks.
4
Press
the
Adjust switch to adjust the “day”.
Press
Adjust switch to increase the number by one.
Press
Date/Time Set switch to confi rm the setting.
The “day” is set and the “hour” indicator blinks.
5
Press
the
Adjust switch to adjust the “hour”.
Press
Adjust switch to increase the number by one.
Press
Date/Time Set switch to confi rm the setting.
The “hour” is set and the “minutes” indicator blinks.
6
Press
the
Adjust switch to adjust the
“minutes”.
Press
Adjust switch to increase the number by one.
Press
Date/Time Set switch to confi rm the setting.
The “minutes” are set and “12” (12-hour format) blinks.