English
Español
P
o
rtuguês
Deutc
h
F
rançais
-
Eng 7
-
HOW TO SET THE CLOCK
1.
Initial state (when the batteries are loaded in the unit for the first time,
carry out resetting operation)
* Date/hour/alarm setting when the batteries have been loaded
in the unit for the first time
Date and time: 12:00 am, January 1, 2002
Alarm:
12:00 am, alarm is in OFF state
2. Data correcting procedure
The alarm time, current time and calendar should be set in the written order.
* Every press on “SELECT” switch selects a data item to be modified in the order shown below. The
selected item flashes on and off.
1) Alarm, minute
/
2) Alarm, hour
/
3) Second
/
4) Minute
/
5) Hour
/
6) Year
/
7) Month
/
8) Day of month
/
9) Time system (12-hour or 24-hour sys
* Press “SET” switch to increase the indicated value in increments of one.
Keep “SET” switch held pressed to carry out correction quickly.
* The aforementioned switch performance will not be carried out for the correction of “3) Second”
and “9) Time system (12-hour or 24-hour system).”
* After the completion of correction of all items as required, press “POWER/MEASURE” switch to
restore the time indication to the display.
Data indicating
section
“MODE” switch
“SET” switch
Time indicating
section