3.5. Connecting Paper Near End Sensor
Connector used: CN5: 5267-03A (Molex)
Cord Assy: Set up the connection shown in the following figure using CA5 (with connector 5264-03).
Sensor
Control Board
Table: Paper Near End Pin Specifications
Pin No.
Signal Name
Input/Output
Function
1
PNE PWR
—
Photo interrupter anode
2
PNE SIG
Input
Photo interrupter collector
6
GND
—
Photo interrupter cathode/emitter
Reference Circuit Diagram
When using photo interrupter
Control Board
Photo Interrupter
GP2S24
When using switch
Sensor
Paper
* The above circuit is an example of reflection type photo interrupter.
When using the above sensor, allow a clearance of approx. 1 mm from paper.
