CBM-909PC Series User’sManual
18
3.4 Description of control functions
1.
Buffer full automatic print
When the input buffer is filled up by the character data, it starts the printing automatically.
2.
Self test printing
This LSI has a built in self print function.
Take the following procedures to test.
a)
Set the paper properly.
b)
Turn off the power switch.
c)
Turn on the power switch while keeping the PF signal to the low level, then set it to the high level.
d)
To stop the printing, turn off the power switch or set RESET signal to low level.
3.
Emergency Stop Function
When the following abnormalities are detected during the print operation, cut off the power to the print head
solenoids and motor, and put the LSI in the power down mode.
The emergency stop can be cleared by resetting the LSI.
Printer abnormalities are as follows.
a)
Motor lock.
b)
Operation defect in the timing detector (DP signal)
c)
Operation defect in the reset detector (RP signal)
Summary of Contents for CBM-909PC SERIES
Page 2: ...i REVISION Rev No Date Content 1 00 Sep 30 2000 Newly issued ...
Page 28: ...CBM 909PC Series User sManual 24 5 CHARACTER CODE TABLE 5 1 INTERNATIONAL CHARACTER CODES ...
Page 29: ...CBM 909PC Series User sManual 25 ...
Page 30: ...CBM 909PC Series User sManual 26 5 2 JAPANESE CHARACTER CODES ...
