manualshive.com logo in svg

Citizen C00A, Instruction Manual

Share
Download
Citizen C00A Instruction Manual Download Page 15

29

10. Using the Chronograph

The chronograph is able to measure and display time up to a maximum of 23
hours, 59 minutes, 59.99 seconds in 1/100th second units.  After 24 hours have
elapsed, the chronograph automatically returns to the chronograph reset display
(00'00"00) and stops.

<Normal Chronograph Display>        <Chronograph Measurement>

1. Turn the crown to set the mode hand to the

chronograph [CHR] mode.

2. Pressing button (A) repeatedly starts and

stops the chronograph each time it is pressed.

3. Split time is displayed for 10 seconds when

button (B) is pressed during chronograph
measurement.  

• The "SPL" mark flashes during split time

display.

4. Pressing button (B) while the chronograph is

stopped returns the chronograph to the
chronograph reset display. 

Note: 

1. When the time mode is set to the 12 hour time display, the alarm time also

uses a 12-hour time display.  Pay attention to AM and PM when setting the
alarm time.

<Switching Alarm ON and OF>

The alarm can be switched ON and OF by pulling out the crown to the first click
even when not in the alarm correction state.  
1. Pull out the crown to the first click in the alarm mode to allow the alarm to be

switched ON and OF.  

2. Pressing button (B) switches the alarm ON and OF each time it is pressed.  
3. Return the crown to the normal position after the alarm has been set to ON or

OF.  

<Alarm Monitor>

1. Pressing buttons (A) and (B) simultaneously during the normal alarm display

causes the alarm to sound for as long as they are pressed.

28

Summary of Contents for C00A































Reviews:

No comments

Brands by name

Popular brands

Load more brands