Citizen bn4026 Instruction Manual Download Page 6

Page: 6 / 81

Before using this watch

About the compass

This watch does not function as a specialized compass instrument certified by any

authority or regulating standards. Use the indicated compass direction only as a

reference.

WARNING

Do not use the compass function of this watch in the following cases:
• When precise directional indication is required for navigational or other

activities with serious risks.

CAUTION

Compass direction may be measured improperly in the following cases:
• When the watch is not kept level.

• When the surrounding magnetic field is disturbed.

• When air temperature changes sharply.

• When surrounded by reinforced concrete wall or things made of iron.

• When electric cables, electric trains or electric products exist around.

When storing the watch

Avoid places or things with strong magnetism when storing this watch.

Summary of Contents for bn4026


















































































Search results

Summary of Contents for bn4026

Reviews:

Brands by name

Popular brands

Citizen bn4026, Instruction Manual

Search results

Summary of Contents for bn4026

Reviews:

Brands by name

Popular brands