Citizen ATB Instruction Manual Download

Page: 64 / 77

Eco-Drive watch handling precautions

<Replacement of Rechargeable Cell>

• This watch utilizes a special rechargeable cell that does not require regular replacement.

However power consumption may increase after using the watch for a number of years due

to wear of internal components and deterioration of oils. This may cause stored power to be

depleted at a faster rate. For optimal performance, we recommend having your watch

inspected (chargeable to the owner) by an Authorized Service center to ensure operation is

within factory specifications.

WARNING

Handling of Rechargeable Cell

• The rechargeable cell should never be removed from the watch.

If for any reason it becomes necessary to remove the rechargeable cell from the watch, keep

out of the reach of children to prevent accidental swallowing.

If the rechargeable cell is accidentally swallowed, consult a doctor immediately.

• Do not dispose of the rechargeable cell with ordinary garbage. Please follow the instructions

of your municipality regarding collection of batteries to prevent the risk of fire or

environmental contamination.

Summary of Contents for ATB














































































Search results

Summary of Contents for ATB

Reviews:

Related manuals for ATB

Brands by name

Popular brands

Citizen ATB, Instruction Manual

Search results

Summary of Contents for ATB

Reviews:

Related manuals for ATB

Brands by name

Popular brands