background image

20

21

9. General Reference for Charging Times

The charging time varies according to the watch model (including the color of the dial). The
following times are intended as a general reference only.
* Charging time refers to the amount of time that the watch is continuously exposed to light.

Illuminance

(lx)

500

1,000

60-70 cm (24-28 in) under a
fluorescent lamp (30 W)

2 hours

40 minutes

12 minutes

2 minutes

20 cm (18 in) under a
fluorescent lamp (30 W)

Outdoors under a cloudy sky

Outdoors in the summer,
under direct sunlight

3,000

10,000

100,000

Environment

Inside an ordinary office

Charging time (estimated)

4 hours

Charging

time

required for

1 day of

operation

25 hours

6.5 hours

2 hours

25 minutes

45 hours

Charging time to

level 1 

(1-second

interval

movement) from

stopped state

130 hours

40 hours

6 hours

Charging

time to 

level 2 

from

stopped

state

210 hours

70 hours

10 hours

Charging time

to 

level 3 

(fully charged)

from stopped

state

Charging time for 1 day of operation: Time required to charge the watch to run for 1 day

at 1-second interval movement.

Full charging time: Time required to charge the watch from the stopped state to fully

charged.

Level 1: Even if the watch is running at 1-second intervals, it is still not charged enough.

Charge the watch at least to level 2.

Summary of Contents for 9800



















Reviews: