15
<How to set LC display panels, LC display panel supporter, and E.L. panel>
Check the setting directions of the LC dis-
play panel supporter and the 2 LC display
panels.
(1) Taking care of the setting directions of
each part, set the LC display panels
(1) and (2) to the LC display panel sup-
porter.
Insert the LC display panels under the
peaks (2 places) on the 9-o'clock side
of the LC display panel supporter and
open the hook on the 3-o'clock side to
set the LC display panels.
(2) Insert the 3-o'clock side (electrode
side) of the E. L. panel under the peak
on the 3-o'clock side of the LC display
panel supporter. Bend the E. L. panel
and set it to the peak on the 9-o'clock
side.
(3) Set the LC display panel supporter on
which the 2 LC display panels and the
E. L. panel are installed to the move-
ment.
<How to set each part in correct direction>
• LC display panel supporter:
Set the mark of "12H" to the 12-o'clock
side.
• LC display panel (1):
Set the electrode having 1 black point at
each end to the 12-o'clock side and the
electrode having 1 black point at only 1
end to the 6-o'clock side.
• LC display panel (2):
Set the electrode having 3 black points (1
at 1 end and 2 at the other end) to the 12-
o'clock side and the electrode having 2
black points (1 at each corner) to the 6-
o'clock side.
Hook on
3-o'clock side
(Take care not
to open this
hook too wide.)
Peaks on
9-o'clock
side
Peak on
9-o'clock
side
Peak on
3-o'clock
side
LC display panel supporter
Electroluminescence panel
Black points
Black points
LC display
panel (2)
LC display
panel (2)
6-o'clock side
12-o'clock side
6-o'clock side
"12H" mark
