5
Some earphones allow you to hear some exterior sounds while you are listening at normal volume levels. However
they still create a dangerous risk.
Operation :
Using the Television
1. To turn the television on set the RADIO/OFF/TV switch to TV.
2. Set the VL/VH/UHF switch to the desired frequency range.
VL – to select VHF channels 2 to 6
VH – to select VHF channels 7 to 13
UHF – to select UHF channels 14 to 83
3. Turn the TV TUNING knob to the desired station.
4. Adjust the telescoping antenna to obtain the best picture and sound.
5. Turn the BRIGHTNESS, CONTRAST and V-HOLD knobs, located on the back of the radio/television to
adjust the picture as required.
BRIGHTNESS – Adjust until the picture is neither too dark nor too bright.
CONTRAST – Adjust until the picture is neither too soft nor too harsh.
V-HOLD – Adjust so that the picture does not roll vertically.
6. Turn the VOLUME knob to adjust the volume to a comfortable level.
7. To turn the radio/television off set the RADIO/OFF/TV switch to OFF.
Hints Regarding TV Signal Reception
If the picture is fuzzy, unstable, or if there is ‘snow’, the signal reception may be poor. Your location or the position
or length of the antenna may be the cause. Some buildings with a steel frame can also cause reception problems.
Try to change the direction or length of the antenna. If that does not work, use an exterior antenna.
If the picture disappears from the screen while the unit is being powered with batteries th ebatteries may be weak.
Replace or recharge the batteries.
Using the Radio
1. To turn the radio on set the RADIO/OFF/TV switch to RADIO.
2. Set the AM/FM switch to AM or FM, whichever you wish.
3. Turn the RADIO TUNING knob to the desired station.
4. Turn the VOLUME control to the desired level.
5. To turn the radio/television off set the RADIO/OFF/TV switch to OFF.
