5
4) Fasten the tripod support bracket to each leg using the included bolts and nuts that
come attached to the end of each arm of the tripod support bracket. Remove each
bolt and nut. (See Fig. 3). Then position one arm of the tripod support bracket so that
the holes at the end of the arm line up with the hole through the attachment point on
the tripod leg (See Fig. 4). Insert the bolt to attach the tripod support bracket to the
tripod leg and tighten the nut. Repeat this procedure with the other two legs.
(Fig. 3) (Fig. 4)
5) Fasten the accessory tray to the tripod support bracket by placing the tray’s bolt
into the threaded hole and turning the tray clockwise until tight (See Fig. 5).
(Fig. 5)
