6
Fan rubs when turning:
call CITC for instructions. Do not remove cover.
Motor jumps or is unsteady:
check extension cord for low gauge. Turn off any other
loads sharing the same circuit or test in dedicated outlet.
Fan starts slowly:
Check extension cord for low gauge. Turn off any other loads sharing
the same circuit or test in dedicated outlet.
5.7 Notes on optional DMX FX-15 Switchpack operation
Each DMX’d unit will occupy a unique DMX address on the DMX chain. By adjusting the
dip switches on the side of the machine near the DMX cable plug-ins, the user may
assign one address to the machine, giving you on/off and volume control with one DMX
channel (there is no timer on this DMX).
Step 1).
Attach the DMX cable to the upper “in” female connector located on the end
of the fan.
Step 2).
The DMX address is configured by adding the dip switch numbers together
to total the number required. For example, DipSwitch 1 + 6 = 33. Your DMX channel
would be 33.
Dip Switch
1
2
3
4
5
6
7
8
9
Channel #
1
2
4
8
16
32
64
128
256
When you move the slide control or digital control to approximately the 50%
position the fan will turn on.
0 – 50%
= Off
51– 100%
= On
“Input” and “Output” designations on the DMX plugs are arbitrary (i.e., you can use the
input plug for output and visa-versa). It is not necessary to attempt converting your DMX
line’s connector to female/male to match the appropriate socket on the plug. As long as it
is looped in/out, it will work.
6.
Service and Maintenance
