CTD-N Technical Manual
P/N 95F-6000-00 (February 2017)
page 13
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Self-Contained Units:
•
Dummy connector and locking sleeve
•
Spare O-rings
•
Spare mounting hardware
•
Alkaline battery pack
Direct Reading Units
•
Pigtail and locking sleeve
NH Units
•
Spare antifouling screens
•
Spare PVC collars for antifouling screens
Optional Items
Optional items typically include the following:
•
Additional test cable
•
RS-485/RS-232 converter
•
Additional alkaline battery pack
These items are available from TRDI and are listed with their part numbers in Table 1 below. See
for information on how to contact TRDI to order any of these items.
Table 1:
Optional Items Available from TRDI
ITEM
TRDI PART NUMBER
Test Cable
NXIC-OP-CAB-PWR
RS-485/RS-232 Converter
3201-RS232-485
Alkaline Battery Pack
B176-030
NOTE.
Spares kits are also available from TRDI. Contact TRDI for more information on these
items.
Installing CTDPro and Selecting the CTD-N
The CTD-N is configured using the CTDPro software which must be installed on the computer to
which the instrument will be connected. In addition, you must start CTDPro and select the CTD-N
or verify that it is already selected. Once selected the CTD-N remains selected until changed.
Installing CTDPro
To install CTDPro:
1. Insert the CTD Documentation and Software CD into your CD-ROM drive. If the CD
browser does not appear, navigate to the drive containing the CD and double-click on
Launch.exe.
2. Click on the CTD Products button.
