Cissell AJ1032, Operation & Maintenance Manual

Page: 16 / 22

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
AJ1032 14
Cleaning Press Head
Cleaning press head is periodically required. Press
head requires cleaning if discoloration transfers from
head to garments or garments stick to head as it opens.
Once precautions in above WARNINGS have been
met, follow directions provided with surface cleaner.
Time Intervals Operation or Inspection Corrective Action
Daily or as required Visually inspect sight glass in air line filter at
inlet. (Refer to Item 4,
Figure 4 .)
If moisture and oil are collecting in bowl, auto-
drain is not working. Clean, repair or replace
auto-drain.
Check buck padding. Clean padding. Replace padding if it is torn or
brittle or has burn spots.
Visually inspect press head for discoloration or
stickiness. Clean press head with a head surface cleaner as
needed.
Weekly Inspect air line filter for sediment. Clean air filter if dirt is present.
Inspect all safety labels. Refer to Parts Manual
for location and description of labels. Replace labels which are damaged, missing or
unreadable.
Every two weeks Inspect steam strainers in steam inlet and outlet
lines and in traps. Clean steam strainer if dirt is present.
Monthly Inspect customer-furnished steam traps per
instructions provided with traps. Clean customer-furnished steam traps if dirt is
present.
Check all steam and air connections for visual
signs of leakage. Tighten any loose connections. Replace lines
where necessary.
Check condition of the flexible steam hoses. Replace steam hoses with broken braids.
Every six months Remove all covers and check cap screws,
fittings and cylinders for security of
attachment. Tighten as required.
Table 2
To avoid possible serious injury, heads
should be cleaned ONLY by properly
trained personnel.
W342
WARNING
To avoid possible serious injury, ALWAYS
shut off services to press BEFORE
cleaning press heads:
• Shut off AND lock out ALL electric power
to press.
• Shut off AND lock out ALL air pressure to
press using relieving shut-off valve at air
supply inlet.
• Reduce to zero AND lock out ALL steam
pressure to press.
• Let heated surfaces cool.
W343
WARNING
If using a surface cleaner which requires
heat to the press, use industry approved
heat protective mitt or other heat protective
device as press heads are cooling down.
W344
WARNING