CISEYE CIP-300W Instruction Manual Download Page 57

Page: 57 / 87

Appendix

A. Troubleshooting

Status LED

After powering up, the Network Camera performs a self-diagnostic to detect any

hardware defects. The following table lists the LED patterns in general. In case of any

fatal error, the LED will blink in a pattern other than those below.

LED color

Blink in interchanged green and red

Red LED is off till Ethernet is detected

Steady green till IP address is confirmed

Blink green every second

Other patterns

Condition

During self-diagnostic after power on

Ethernet signal is lost

Before network is setup

After network is setup

Any hardware failure

Reset and Restore

At the left side of the camera there is a button

hidden in the pinhole as shown in the picture. It is used

to reset the system or restore the factory default settings.

Sometimes resetting the system sets the system back to

normal state. If the system problems remain after reset,

restore the factory settings and install again.

RESET: Poke the wrench to click on the

button.

RESTORE:

1. Poke the wrench to press on the button

continuously.

2. Wait for self-diagnostic to run twice.

3. Withdraw the wrench as soon as the

second self-diagnostic starts.

Restoring the factory defaults

will erase any previous settings.

Reset or restore the system after

power on.

- 52 -

Summary of Contents for CIP-300W























































































Search results

Summary of Contents for CIP-300W

Reviews:

CISEYE CIP-300W, Instruction Manual, Page: 57 / 87

Search results

Summary of Contents for CIP-300W

Reviews: