Cisco XR 1200 series Command Reference Manual Download Page 62

Page: 62 / 432

show logging correlator info

To display the logging correlator buffer size and the percentage of the buffer occupied by correlated messages,
use the

show correlator info

command in EXEC mode.

show logging correlator info

Syntax Description

This command has no keywords or arguments.

Command Default

None

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.2

Usage Guidelines

This command displays the size of the logging correlator buffer and the percentage of the buffer allocated to
correlated messages.

Use the

logging correlator buffer-size, on page 20

command to set the size of the buffer.

Task ID

Operations

Task ID

read

logging

Examples

In this example, the

show logging correlator info

command is used to display remaining buffer size and

percentage allocated to correlated messages:

RP/0/0/CPU0:router#

show logging correlator info

Buffer-Size

Percentage-Occupied

81920

0.00

Related Commands

Description

Command

Specifies the logging correlator buffer size.

logging correlator buffer-size, on page 20

Displays messages in the logging correlator buffer.

show logging correlator buffer, on page 47

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

Alarm Management and Logging Correlation Commands

show logging correlator info

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands