Cisco WVC54GCA, User Manual

Page: 253 / 349

3
Installation
Connect the included network cable
to your network router or switch . Click
Next
.
Connect the other end of the network
cable to the Camera’s Ethernet port .
Click
Next .
Plug the included power adapter into
the Camera’s Power port . Plug the other
end into an electrical outlet . Click
Next .
Make sure the LED is lit on the Camera’s
front panel . If it is not lit, make sure the
cables are properly connected to the
Camera . Click
Next
.
E.
F.
G.
H.
Installation (English)