manualshive.com logo in svg

Cisco WS-C2960G-8TC-L, Configuration, Page: 7 / 30

Share
Download
Cisco WS-C2960G-8TC-L Configuration Download Page 7

Switch Startup 

363

CertPrs8

/CCNA

®

 Cisco Certified Network Associate Study Guide/Richard Deal/149728-5/Chapter 12 

executing... 
 
              Restricted Rights Legend 
Use, duplication, or disclosure by the Government is 
subject to restrictions as set forth in subparagraph 
(c) of the Commercial Computer Software – Restricted 
Rights clause at FAR sec. 52.227-19 and subparagraph 
(c) (1) (ii) of the Rights in Technical Data and Computer 
Software clause at DFARS sec. 252.227-7013. 
 
           Cisco Systems, Inc. 
           170 West Tasman Drive 
           San Jose, California 95134-1706 
 
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M),  
     Version 12.2(40)SE, RELEASE SOFTWARE (fc3) 
Copyright (c) 1986-2007 by Cisco Systems, Inc. 
Compiled Fri 24-Aug-07 01:55 by myl 
Image text-base: 0x00003000, data-base: 0x00FC0000 
 
Initializing flashfs... 
flashfs[1]: 602 files, 19 directories 
flashfs[1]: 0 orphaned files, 0 orphaned directories 
flashfs[1]: Total bytes: 32514048 
. 
. 
. 
flashfs[1]: Initialization complete....done Initializing 
flashfs. 
POST: CPU MIC register Tests : Begin 
POST: CPU MIC register Tests : End, Status Passed 
POST: PortASIC Memory Tests : Begin 
POST: PortASIC Memory Tests : End, Status Passed 
POST: CPU MIC interface Loopback Tests : Begin 
POST: CPU MIC interface Loopback Tests : End, Status Passed 
POST: PortASIC RingLoopback Tests : Begin 
POST: PortASIC RingLoopback Tests : End, Status Passed 
POST: PortASIC CAM Subsystem Tests : Begin 
POST: PortASIC CAM Subsystem Tests : End, Status Passed 
POST: PortASIC Port Loopback Tests : Begin 
POST: PortASIC Port Loopback Tests : End, Status Passed 
 
Waiting for Port download...Complete 
 

ch12.indd   363

3/12/08   4:45:03 PM

Summary of Contents for WS-C2960G-8TC-L































Reviews:

No comments