manualshive.com logo in svg

Cisco WPC300N, User Manual

Share
Download
Cisco WPC300N User Manual Download Page 26

20

Chapter 5: Using the Wireless Network Monitor
Connect

Wireless-N Notebook Adapter

Connect

The 

Connect 

screen displays a list of available networks in the table on the left. The table shows each network’s 

Wireless Network Name, Channel, and the quality of the wireless signal the Adapter is receiving. You may click 
Wireless Network Name, CH (Channel), or Signal, to sort by that field.

Wireless Network Name - The SSID or unique name of the wireless network is displayed here.

CH - This is the channel that the network uses.

Signal - This is the percentage of signal strength, from 0 to 100%.

Site Information

For each network selected, the following settings are listed:

Wireless Mode - This is the mode of the wireless network currently in use.

Network Type- This is the network type used by your wireless network.

Radio Band - This is the radio band used by your wireless network.

Security - The status of the wireless security feature is displayed here.

MAC Address- The MAC address of the wireless network’s access point is displayed here.

Refresh - Click the 

Refresh

 button to perform a new search for wireless devices.

Connect - To connect to one of the networks on the list, select the wireless network, and click the 

Connect

 

button. If the network has encryption enabled, then you will see a new screen appear.

•

If the network has the wireless security WEP encryption enabled, then you will see the 

WEP Key Needed for 

Connection

 screen. Select the appropriate level of WEP encryption, 64-bit or 128-bit). Then enter the 

network’s Passphrase or WEP Key. Click the 

Connect

 button. To cancel the connection, click the 

Cancel 

button.

•

If the network has the wireless security PSK security enabled, then you will see the

PSK for Connection

 screen. Select the appropriate encryption type, TKIP or AES. Enter the network’s Pre-

shared Key in the 

Pre-shared Key

 field. Then click the 

Connect

 button. To cancel the connection, click the 

Cancel 

button.

Figure 5-6: WEP Key Needed for Connection

Figure 5-7: PSK Needed for Connection

Figure 5-8: PSK2 Needed for Connection

Summary of Contents for WPC300N

































Reviews:

No comments

Brands by name

Popular brands

Load more brands