Cisco Webex 800 Series User Manual Download Page 109

Page: 109 / 130

Charge Your Phone and Battery with Desktop Dual Charger

You can charge your phone and one spare battery with the desktop dual charger.

If both the phone and battery are in the charger, the phone takes priority. So it may take longer to charge the
battery.

There are two LEDs: one for the phone and one for the battery. The LEDs turn on when you properly seat the
phone and battery.

• A solid red LED indicates that the item is charging.

• A solid green LED indicates that the item is fully charged.

• An LED that is off indicates an empty slot or an error condition.

These steps are the same for both the Cisco Webex Wireless Phone 840 Desktop Dual Charger and Cisco
Webex Wireless Phone 860 Desktop Dual Charger Module. The illustration is of the Cisco Webex Wireless
Phone 860 Desktop Dual Charger Module.

Note

Before you begin

Ensure that you properly set up the desktop charger.

Procedure

Step 1

With the battery charging contacts down, insert a spare battery into the dual charger rear slot.

Step 2

Insert your phone face forward into the dual charger front slot.

Related Topics

Set Up the Desktop Charger Modules

, on page 98

Charge Your Spare 860 Batteries with Desktop Battery Charger

You can charge up to two spare 860 batteries at a time in the Cisco Webex Wireless Phone 860 Desktop
Battery Charger Module.

Cisco Webex Wireless Phone 800 Series User Guide

Accessories

Charge Your Phone and Battery with Desktop Dual Charger

Summary of Contents for Webex 800 Series



































































































































Search results

Summary of Contents for Webex 800 Series

Reviews:

Related manuals for Webex 800 Series

Brands by name

Popular brands

Cisco Webex 800 Series, User Manual

Search results

Summary of Contents for Webex 800 Series

Reviews:

Related manuals for Webex 800 Series

Brands by name

Popular brands